The Reglazing Process

The reglazing process is quick and efficient. Reglazing is a low-cost and minimal waste solution for your bathroom project.

The process takes between 1.5 - 3.5 hours, depending on the job.
After 24 hours of curing, it is ready to use.

Step 1

Remove old caulking & strip old paint (when necessary).

This tub was an original green tub. The client wanted to modernize their bathroom by making it white.

Prep the tub using special cleaning products.

Our pink etch strips the surface and ensures the epoxy grips properly.

Repair any damage (i.e. scratches, dents, rust, etc.) and re-caulk around the tub.

We use a body filler to fill in any cracks or damage. Then we sand it smooth so it's no longer visible.

Protect surrounding tiles and fixtures using tape, paper, and drop clothes.

This ensures the surrounding area is protected from overspray.

Spray epoxy onto surface. Remove paper and tape coverings & perform a quality check.

After 24 hours it is ready to use!